terraform script add

packer/ansible/roles/security-settings/templates/common-auth.j2

@@ -0,0 +1,27 @@
+#
+# /etc/pam.d/common-auth - authentication settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authentication modules that define
+# the central authentication scheme for use on the system
+# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
+# traditional Unix authentication mechanisms.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+auth	required			pam_tally2.so onerr={{onerr}} even_deny_root deny={{deny}} unlock_time={{unlock_time}}
+
+# here are the per-package modules (the "Primary" block)
+auth    [success=1 default=ignore]      pam_unix.so nullok
+# here's the fallback if no module succeeds
+auth    requisite                       pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+auth    required                        pam_permit.so
+# since the modules above will each just jump around
+# and here are more per-package modules (the "Additional" block)
+auth    optional                        pam_cap.so
+# end of pam-auth-update config

packer/ansible/roles/security-settings/templates/pwquality.conf.j2

@@ -0,0 +1,50 @@
+# Configuration for systemwide password quality limits
+# Defaults:
+#
+# Number of characters in the new password that must not be present in the
+# old password.
+# difok = 5
+#
+# Minimum acceptable size for the new password (plus one if
+# credits are not disabled which is the default). (See pam_cracklib manual.)
+# Cannot be set to lower value than 6.
+minlen = {{pwquality_minlen}}
+#
+# The maximum credit for having digits in the new password. If less than 0
+# it is the minimum number of digits in the new password.
+dcredit = {{pwquality_dcredit}}
+#
+# The maximum credit for having uppercase characters in the new password.
+# If less than 0 it is the minimum number of uppercase characters in the new
+# password.
+ucredit = {{pwquality_ucredit}}
+#
+# The maximum credit for having lowercase characters in the new password.
+# If less than 0 it is the minimum number of lowercase characters in the new
+# password.
+lcredit = {{pwquality_lcredit}}
+#
+# The maximum credit for having other characters in the new password.
+# If less than 0 it is the minimum number of other characters in the new
+# password.
+ocredit = {{pwquality_ocredit}}
+#
+# The minimum number of required classes of characters for the new
+# password (digits, uppercase, lowercase, others).
+# minclass = 0
+#
+# The maximum number of allowed consecutive same characters in the new password.
+# The check is disabled if the value is 0.
+maxrepeat = {{pwquality_maxrepeat}}
+#
+# The maximum number of allowed consecutive characters of the same class in the
+# new password.
+# The check is disabled if the value is 0.
+# maxclassrepeat = 0
+#
+# Whether to check for the words from the passwd entry GECOS string of the user.
+# The check is enabled if the value is not 0.
+# gecoscheck = 0
+#
+# Path to the cracklib dictionaries. Default is to use the cracklib default.
+# dictpath =

packer/ansible/roles/security-settings/templates/sysctl.j2

@@ -0,0 +1,79 @@
+#
+# /etc/sysctl.conf - Configuration file for setting system variables
+# See /etc/sysctl.d/ for additional system variables.
+# See sysctl.conf (5) for information.
+#
+
+#kernel.domainname = example.com
+
+# Uncomment the following to stop low-level messages on console
+#kernel.printk = 3 4 1 3
+
+###################################################################
+# Functions previously found in netbase
+#
+
+# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
+# Turn on Source Address Verification in all interfaces to
+# prevent some spoofing attacks
+#net.ipv4.conf.default.rp_filter=1
+#net.ipv4.conf.all.rp_filter=1
+
+# Uncomment the next line to enable TCP/IP SYN cookies
+# See http://lwn.net/Articles/277146/
+# Note: This may impact IPv6 TCP sessions too
+#net.ipv4.tcp_syncookies=1
+
+# Uncomment the next line to enable packet forwarding for IPv4
+#net.ipv4.ip_forward=1
+
+# Uncomment the next line to enable packet forwarding for IPv6
+#  Enabling this option disables Stateless Address Autoconfiguration
+#  based on Router Advertisements for this host
+#net.ipv6.conf.all.forwarding=1
+
+
+###################################################################
+# Additional settings - these settings can improve the network
+# security of the host and prevent against some network attacks
+# including spoofing attacks and man in the middle attacks through
+# redirection. Some network environments, however, require that these
+# settings are disabled so review and enable them as needed.
+#
+# Do not accept ICMP redirects (prevent MITM attacks)
+#net.ipv4.conf.all.accept_redirects = 0
+#net.ipv6.conf.all.accept_redirects = 0
+# _or_
+# Accept ICMP redirects only for gateways listed in our default
+# gateway list (enabled by default)
+# net.ipv4.conf.all.secure_redirects = 1
+#
+# Do not send ICMP redirects (we are not a router)
+#net.ipv4.conf.all.send_redirects = 0
+#
+# Do not accept IP source route packets (we are not a router)
+#net.ipv4.conf.all.accept_source_route = 0
+#net.ipv6.conf.all.accept_source_route = 0
+#
+# Log Martian Packets
+#net.ipv4.conf.all.log_martians = 1
+#
+
+###################################################################
+# Magic system request Key
+# 0=disable, 1=enable all, >1 bitmask of sysrq functions
+# See https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html
+# for what other values do
+#kernel.sysrq=438
+
+net.core.default_qdisc = fq
+net.core.rmem_max = 268435456
+net.core.wmem_max = 268435456
+net.ipv4.conf.all.arp_announce = 2
+net.ipv4.conf.all.arp_filter = 1
+net.ipv4.conf.all.arp_ignore = 1
+net.ipv4.conf.default.arp_filter = 1
+net.ipv4.tcp_congestion_control = htcp
+net.ipv4.tcp_no_metrics_save = 1
+net.ipv4.tcp_rmem = 4096 87380 134217728
+net.ipv4.tcp_wmem = 4096 65536 134217728